model 73029 mmcx jack straight crimp , rg174 , 316 technical support: technicalsupport@pomonatest.com fax: 425-446-5844 europe: 31-(0) 40 2675 150 international : 425-446-5500 where to bu y : www. p omonaelectronics.com .xxx = .005? (.127 mm). all specific ations are to the latest revisions. specifications are subjec t to change without notice. registered trademarks are the property of their respective companies. d2003460 rev 001 copyright ? 2007 12/17/2007 page 1 of 2 usa: sales: 800-490-2361 all dimensions are in inches. toleranc es (except noted): .xx = .02? (.51 mm), model 73029 mmcx jack straight crimp, rg174, 316 snap-on coupling and micro- miniature size for fast connect and disconnect where space is limited features ? dc - 4 ghz bandwidth. ? 50% smaller than mcx connectors. ? connectors allow rotation of 360 ? for layout flexibility. ? non-slotted contact design for low rf leakage. ? meets cecc 22340 . ? perfect for applications where space, weight, performance and ease of assembly are required. materials ? body is machined brass with gold plating. ? center contacts ? plug is gold plated phosphor bronze and jack is gold plated beryllium copper. ? high quality ptfe insulators. ? crimp ferrules are gold or nickel plated copper. ordering information model: 73029 description: mmcx jack straight crimp, rg174, 316 specifications impedance 50 ? frequency range dc - 4 ghz working voltage 170 vrms max. dielectric withstanding voltage 750 vrms vswr 1.3 max center / outer contact resistance 6 / 1 m ? number of insertions 500 cycles minimum insulation resistance > 1000 m ? temperature range -55 ? c to 155 ? c, -67 ? f to 311 ? f
model 73029 mmcx jack straight crimp , rg174 , 316 cable types and crimp die information connector model # cable groups crimp die cavity size for outer ferrule 73029 rg174, 316 .128 (3.3) . cable assembly instructions usa: sales: 800-490-2361 technical support: technicalsupport@pomonatest.com fax: 425-446-5844 europe: 31-(0) 40 2675 150 international : 425-446-5500 where to bu omonaelectronics.com all dimensions are in inches. toleranc es (except noted): .xx = .02? (.51 mm), .xxx = .005? (.127 mm). all specific ations are to the latest revisions. specifications are subjec t to change without notice. registered trademarks are the property of their respective companies. d2003460 rev 001 y : www. p copyright ? 2007 12/17/2007 page 2 of 2
|
